Titanium Alloy Grade 5 Seamless Pipes & Tubes Manufacturer & Supplier
Titanium Grade 5, also known as Ti 6-4, is the most widely used titanium alloy due to its excellent strength-to-weight ratio and corrosion resistance. It is primarily utilized in aerospace, marine, and industrial applications where superior mechanical properties are required. Its ability to withstand high temperatures and aggressive environments makes it suitable for critical applications.
UNS: R56400 | Category: Titanium | Werkstoff Nr: 3.7165 | EN Name: Ti 6-4
Physical Properties
- Density
- 4.43 g/cm3
- Melting Range
- 1660-1680 C
- Thermal Conductivity
- 6.7 W/m-K
- Electrical Resistivity
- 0.42 μΩ-m
- Specific Heat
- 520 J/kg-K
- Coeff. of Thermal Expansion
- 8.6 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- Not applicable
- Max Service Temp (Oxidizing)
- 600 C
- Intergranular Corrosion
- Resistant
- Stress Corrosion Cracking
- Low susceptibility
- General Corrosion Rate
- <0.1 mm/yr in many environments
- Seawater Resistance
- Excellent
Applicable Standards
- ASTM B861
- ASTM B338
- ASME SB861
- ASME SB338
Applications
- Aerospace components
- Medical implants
- Marine engineering
- Chemical processing equipment
Key Advantages
- High strength-to-weight ratio
- Excellent corrosion resistance
- Good weldability and formability
- Stable at elevated temperatures
Equivalent Grades
- ASTM
- Grade 5
- JIS
- Ti-6Al-4V
- BS
- Ti 6-4
- GOST
- VT6
Frequently Asked Questions
What are the equivalent grades of Titanium Grade 5?
Nearest equivalents of Titanium Grade 5: Grade 5 (ASTM), Ti-6Al-4V (JIS), Ti 6-4 (BS), VT6 (GOST). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Tubulars supply Titanium Grade 5 to?
Titanium Grade 5 is supplied to ASTM B861, ASTM B338, ASME SB861 and ASME SB338.
What is Titanium Grade 5 used for?
Titanium Grade 5 is used for Aerospace components, Medical implants, Marine engineering and Chemical processing equipment.
Last updated: