Titanium Grade 2 (UNS R50400) Seamless Pipes & Tubes Manufacturer & Supplier
Titanium Grade 2 (UNS R50400) is the workhorse commercially pure titanium grade, offering an exceptional balance of corrosion resistance, formability and weldability at roughly 56% the density of steel. Its self-healing TiO2 passive film makes it immune to seawater, oxidizing acids and wet chlorine, and its low ionic leaching suits ultra-pure water and semiconductor wet-processing service.
UNS: R50400 | Category: Commercially Pure Titanium | Werkstoff Nr: 3.7035 | EN Name: Ti Grade 2 / Ti99.5
Titanium Grade 2 — Also Known As
Titanium Grade 2 is also commonly known as Titanium Grade 2, 2 Titanium Grade, Titanium Grade 2 (UNS R50400) Seamless Pipes & Tubes, R50400, UNS R50400, 3.7035, Werkstoff 3.7035, W.Nr 3.7035, Ti Grade 2 / Ti99.5, grade 2 titanium, gr 2 titanium, ti grade 2, ti gr 2, ti99.2.
Titanium Grade 2 — Applicable Standards & Specifications
Titanium Grade 2 is commonly supplied to ASTM B338, ASME SB338, ASTM B861, ASME SB861, ASME SB862, ASTM B337, ASME SB337, ASTM B338M, ASTM B861M.
Size Range
Outer Diameter: 1/4" NPS to 6" NPS (6.35mm to 168.3mm OD)
Wall Thickness: SCH 5S to SCH 40S
Chemical Composition (%)
| Ti | Fe | O | C | N | H |
|---|---|---|---|---|---|
| Remainder | 0.30 max | 0.25 max | 0.08 max | 0.03 max | 0.015 max |
Mechanical Properties
- Tensile Strength
- 345 MPa min
- Yield Strength
- 275-450 MPa
- Elongation
- 20% min
- Hardness
- N/A
Physical Properties
- Density
- 4.51 g/cm3
- Melting Range
- 1660-1670 C
- Thermal Conductivity
- 16.4 W/m-K
- Electrical Resistivity
- 560 nOhm-m
- Specific Heat
- 523 J/kg-K
- Coeff. of Thermal Expansion
- 8.6 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- N/A (passive TiO2 film)
- Max Service Temp (Oxidizing)
- 425 C
- Intergranular Corrosion
- Immune
- Stress Corrosion Cracking
- Immune in chlorides
- General Corrosion Rate
- <0.005 mm/yr in seawater, nitric acid and wet chlorine
- Seawater Resistance
- Outstanding - immune to pitting and crevice corrosion
Applicable Standards
- ASTM B338 / ASME SB338
- ASTM B861 / ASME SB861
- ASTM B862
- DIN 17861
Applications
- Semiconductor wet-bench acid piping (HNO3, chromic and mixed acids)
- Ultra-pure water and DI water heat exchangers
- Seawater condensers and desalination
- Chlor-alkali and bleaching plants
- Pharmaceutical and food-grade heat exchangers
- Chemical process cooling loops
Industries Served
- Semiconductor & Electronics
- Desalination
- Chemical Processing
- Marine
- Power Generation
Key Advantages
- Immune to seawater and chloride pitting and crevice corrosion
- Excellent in oxidizing acids (nitric, chromic) and wet chlorine
- Very low metal-ion leaching into ultra-pure water
- Half the weight of stainless steel for equivalent wall
- Non-magnetic and biocompatible
- Fully weldable with standard GTAW under inert shielding
Equivalent Grades
- ASTM
- Grade 2
- Trade
- CP Titanium Gr.2
- DIN
- 3.7035
Frequently Asked Questions
What is the chemical composition of Titanium Grade 2?
Titanium Grade 2 contains Ti Remainder, Fe 0.30 max, O 0.25 max, C 0.08 max, N 0.03 max, H 0.015 max (weight %).
What are the mechanical properties of Titanium Grade 2?
Tensile Strength: 345 MPa min; Yield Strength: 275-450 MPa; Elongation: 20% min; Hardness: N/A.
What are the equivalent grades of Titanium Grade 2?
Nearest equivalents of Titanium Grade 2: Grade 2 (ASTM B338 / ASME SB338) (ASTM/ASME), R50400 (UNS), 3.7035 Ti 2 (Ti99.5) (EN/DIN), Class 2 (TP340 / TTP340) (JIS), VT1-0 (ВТ1-0) (GOST), TA2 (GB). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Tubulars supply Titanium Grade 2 to?
Titanium Grade 2 is supplied to ASTM B338 / ASME SB338, ASTM B861 / ASME SB861, ASTM B862 and DIN 17861.
What sizes of Titanium Grade 2 are available?
1/4" NPS to 6" NPS (6.35mm to 168.3mm OD).
What is Titanium Grade 2 used for?
Titanium Grade 2 is used for Semiconductor wet-bench acid piping (HNO3, chromic and mixed acids), Ultra-pure water and DI water heat exchangers, Seawater condensers and desalination, Chlor-alkali and bleaching plants, Pharmaceutical and food-grade heat exchangers and Chemical process cooling loops.
Last updated: