Hastelloy C-276 (UNS N10276) Seamless Pipes & Tubes Manufacturer & Supplier

Alloy C-276 (Hastelloy C-276, UNS N10276) is considered the most versatile corrosion-resistant alloy available. With 16% molybdenum, 16% chromium, and 4% tungsten in a nickel base, it resists the formation of grain-boundary precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

UNS: N10276 | Category: Nickel-Molybdenum-Chromium Alloy | Werkstoff Nr: 2.4819 | EN Name: NiMo16Cr15W

Alloy C-276 — Also Known As

Alloy C-276 is also commonly known as Alloy C-276, Hastelloy C-276 (UNS N10276) Seamless Pipes & Tubes, N10276, UNS N10276, 2.4819, Werkstoff 2.4819, W.Nr 2.4819, NiMo16Cr15W, hastelloy c-276, hastelloy c276, alloy c276.

Alloy C-276 — Applicable Standards & Specifications

Alloy C-276 is commonly supplied to ASTM B622, ASME SB622, ASTM B619, ASME SB619, ASTM B626, ASME SB626, ASTM B775, ASME SB775, ASTM B829, ASME SB829.

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 80S

Chemical Composition (%)

NiMoCrWFeCoCMnSiV
Remainder15.0-17.014.5-16.53.0-4.54.0-7.02.5 max0.01 max1.00 max0.08 max0.35 max

Mechanical Properties

Tensile Strength
690 MPa min
Yield Strength
283 MPa min
Elongation
40% min
Hardness
N/A

Physical Properties

Density
8.89 g/cm3
Melting Range
1325-1370 C
Thermal Conductivity
10.2 W/m-K
Electrical Resistivity
1300 nOhm-m
Specific Heat
427 J/kg-K
Coeff. of Thermal Expansion
11.2 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
>70 (highest available)
Max Service Temp (Oxidizing)
1093 C
Intergranular Corrosion
Outstanding (low C)
Stress Corrosion Cracking
Virtually immune
General Corrosion Rate
Nil in most acids
Seawater Resistance
Outstanding

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
N10276
Trade
Hastelloy C-276
DIN
2.4819

Frequently Asked Questions

What is the chemical composition of Alloy C-276?

Alloy C-276 contains Ni Remainder, Mo 15.0-17.0, Cr 14.5-16.5, W 3.0-4.5, Fe 4.0-7.0, Co 2.5 max, C 0.01 max, Mn 1.00 max, Si 0.08 max, V 0.35 max (weight %).

What are the mechanical properties of Alloy C-276?

Tensile Strength: 690 MPa min; Yield Strength: 283 MPa min; Elongation: 40% min; Hardness: N/A.

What are the equivalent grades of Alloy C-276?

Nearest equivalents of Alloy C-276: UNS N10276 (Alloy C-276) (ASTM/ASME), N10276 (UNS), 2.4819 NiMo16Cr15W (EN/DIN), NW0276 (JIS), KhN65MVU (ЭП760) / ХН65МВУ (GOST), NS3304 (N10276) (GB). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Tubulars supply Alloy C-276 to?

Alloy C-276 is supplied to ASTM B622 / ASME SB622, ASTM B619 / ASME SB619, ASTM B626 / ASME SB626 and DIN 17751.

What sizes of Alloy C-276 are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is Alloy C-276 used for?

Alloy C-276 is used for Severe chemical processing environments, Flue gas desulfurization (wet FGD), Pharmaceutical reactor vessels, Waste treatment and incineration, Nuclear fuel reprocessing and Acetic acid and formic acid production.