Incoloy 800HT (UNS N08811) Seamless Pipes & Tubes Manufacturer & Supplier
Alloy 800HT (Incoloy 800HT, UNS N08811) is an enhanced version of Alloy 800 with controlled carbon (0.06-0.10%) and higher combined Al+Ti content (0.85-1.20%). These controlled additions provide significantly higher creep-rupture strength, making it the premier choice for high-temperature furnace applications.
UNS: N08811 | Category: Nickel-Iron-Chromium Alloy | Werkstoff Nr: 1.4876 | EN Name: X10NiCrAlTi32-20
Alloy 800HT — Also Known As
Alloy 800HT is also commonly known as Alloy 800HT, 800HT Alloy, Incoloy 800HT (UNS N08811) Seamless Pipes & Tubes, N08811, UNS N08811, 1.4876, Werkstoff 1.4876, W.Nr 1.4876, X10NiCrAlTi32-20, incoloy 800ht.
Alloy 800HT — Applicable Standards & Specifications
Alloy 800HT is commonly supplied to ASTM B407, ASME SB407, ASTM B163, ASME SB163, ASTM B829, ASME SB829, EN 10216-5.
Size Range
Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)
Wall Thickness: SCH 5S to SCH 80S
Chemical Composition (%)
| Ni | Cr | Fe | C | Al | Ti | Al+Ti | Mn | Si |
|---|---|---|---|---|---|---|---|---|
| 30.0-35.0 | 19.0-23.0 | 39.5 min | 0.06-0.10 | 0.25-0.60 | 0.25-0.60 | 0.85-1.20 | 1.50 max | 1.00 max |
Mechanical Properties
- Tensile Strength
- 520 MPa min
- Yield Strength
- 205 MPa min
- Elongation
- 30% min
- Hardness
- N/A
Physical Properties
- Density
- 7.94 g/cm3
- Melting Range
- 1357-1385 C
- Thermal Conductivity
- 11.5 W/m-K
- Electrical Resistivity
- 989 nOhm-m
- Specific Heat
- 460 J/kg-K
- Coeff. of Thermal Expansion
- 14.4 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- N/A
- Max Service Temp (Oxidizing)
- 900 C (continuous)
- Intergranular Corrosion
- Good
- Stress Corrosion Cracking
- Good
- General Corrosion Rate
- Excellent in carburizing environments
- Seawater Resistance
- Good
Applicable Standards
- ASTM B407 / ASME SB407
- ASTM B163 / ASME SB163
- ASTM B514 / ASME SB514
- DIN 17751
Applications
- Ethylene pyrolysis furnace tubes
- Reformer tubes in hydrogen plants
- Industrial furnace components
- Radiant tubes and muffles
- Power plant superheaters
- Ammonia reformer tubes
Industries Served
- Petrochemical
- Hydrogen Production
- Power Generation
- Chemical Processing
- Fertilizer
Key Advantages
- Superior creep-rupture strength vs Alloy 800/800H
- Controlled Al+Ti for optimum grain boundary strengthening
- Excellent resistance to carburization and oxidation
- Proven in the most demanding furnace tube applications
- Long service life in ethylene cracker tubes
Equivalent Grades
- ASTM
- N08811
- Trade
- Incoloy 800HT
- DIN
- 1.4876 (H/HT)
Frequently Asked Questions
What is the chemical composition of Alloy 800HT?
Alloy 800HT contains Ni 30.0-35.0, Cr 19.0-23.0, Fe 39.5 min, C 0.06-0.10, Al 0.25-0.60, Ti 0.25-0.60, Al+Ti 0.85-1.20, Mn 1.50 max, Si 1.00 max (weight %).
What are the mechanical properties of Alloy 800HT?
Tensile Strength: 520 MPa min; Yield Strength: 205 MPa min; Elongation: 30% min; Hardness: N/A.
What are the equivalent grades of Alloy 800HT?
Nearest equivalents of Alloy 800HT: UNS N08811 (Alloy 800HT) (ASTM/ASME), N08811 (UNS), 1.4959 X8NiCrAlTi32-21 (EN/DIN), NCF 800H (JIS), NA 15(H) (BS), NS1103 (GB). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Tubulars supply Alloy 800HT to?
Alloy 800HT is supplied to ASTM B407 / ASME SB407, ASTM B163 / ASME SB163, ASTM B514 / ASME SB514 and DIN 17751.
What sizes of Alloy 800HT are available?
1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).
What is Alloy 800HT used for?
Alloy 800HT is used for Ethylene pyrolysis furnace tubes, Reformer tubes in hydrogen plants, Industrial furnace components, Radiant tubes and muffles, Power plant superheaters and Ammonia reformer tubes.