Incoloy 800 (UNS N08800) Seamless Pipes & Tubes Manufacturer & Supplier
Alloy 800 (Incoloy 800, UNS N08800) is a nickel-iron-chromium alloy with excellent strength and good resistance to oxidation and carburization in high-temperature environments. It is widely used in petrochemical and power generation industries for process heating applications.
UNS: N08800 | Category: Nickel-Iron-Chromium Alloy | Werkstoff Nr: 1.4876 | EN Name: X10NiCrAlTi32-20
Alloy 800 — Also Known As
Alloy 800 is also commonly known as Alloy 800, 800 Alloy, Incoloy 800 (UNS N08800) Seamless Pipes & Tubes, N08800, UNS N08800, 1.4876, Werkstoff 1.4876, W.Nr 1.4876, X10NiCrAlTi32-20, incoloy 800.
Alloy 800 — Applicable Standards & Specifications
Alloy 800 is commonly supplied to ASTM B407, ASME SB407, ASTM B163, ASME SB163, ASTM B829, ASME SB829, EN 10216-5.
Size Range
Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)
Wall Thickness: SCH 5S to SCH 80S
Chemical Composition (%)
| Ni | Cr | Fe | C | Al | Ti | Mn | Si |
|---|---|---|---|---|---|---|---|
| 30.0-35.0 | 19.0-23.0 | 39.5 min | 0.10 max | 0.15-0.60 | 0.15-0.60 | 1.50 max | 1.00 max |
Mechanical Properties
- Tensile Strength
- 520 MPa min
- Yield Strength
- 205 MPa min
- Elongation
- 30% min
- Hardness
- N/A
Physical Properties
- Density
- 7.94 g/cm3
- Melting Range
- 1357-1385 C
- Thermal Conductivity
- 11.5 W/m-K
- Electrical Resistivity
- 989 nOhm-m
- Specific Heat
- 460 J/kg-K
- Coeff. of Thermal Expansion
- 14.4 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- N/A
- Max Service Temp (Oxidizing)
- 815 C
- Intergranular Corrosion
- Good
- Stress Corrosion Cracking
- Good in chlorides
- General Corrosion Rate
- Excellent in oxidizing and reducing atmospheres
- Seawater Resistance
- Good
Applicable Standards
- ASTM B407 / ASME SB407
- ASTM B163 / ASME SB163
- ASTM B514 / ASME SB514
- DIN 17751
Applications
- Petrochemical heater and reformer tubing
- Heat exchangers in aggressive media
- Industrial furnace components
- Nitric acid production
- Ethylene cracker tubes
- Power plant superheater tubes
Industries Served
- Petrochemical
- Power Generation
- Chemical Processing
- Fertilizer
- Heat Treatment
Key Advantages
- Excellent high-temperature strength and oxidation resistance
- Good resistance to carburization and nitridation
- Economical alternative to higher-nickel alloys
- Versatile for both oxidizing and reducing atmospheres
- Widely available and well-characterized
Equivalent Grades
- ASTM
- N08800
- Trade
- Incoloy 800
- DIN
- 1.4876
Frequently Asked Questions
What is the chemical composition of Alloy 800?
Alloy 800 contains Ni 30.0-35.0, Cr 19.0-23.0, Fe 39.5 min, C 0.10 max, Al 0.15-0.60, Ti 0.15-0.60, Mn 1.50 max, Si 1.00 max (weight %).
What are the mechanical properties of Alloy 800?
Tensile Strength: 520 MPa min; Yield Strength: 205 MPa min; Elongation: 30% min; Hardness: N/A.
What are the equivalent grades of Alloy 800?
Nearest equivalents of Alloy 800: UNS N08800 (Alloy 800) (ASTM/ASME), N08800 (UNS), 1.4876 X10NiCrAlTi32-20 (EN/DIN), NCF 800 (JIS), NA 15 (BS), NS1101 (GB). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Tubulars supply Alloy 800 to?
Alloy 800 is supplied to ASTM B407 / ASME SB407, ASTM B163 / ASME SB163, ASTM B514 / ASME SB514 and DIN 17751.
What sizes of Alloy 800 are available?
1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).
What is Alloy 800 used for?
Alloy 800 is used for Petrochemical heater and reformer tubing, Heat exchangers in aggressive media, Industrial furnace components, Nitric acid production, Ethylene cracker tubes and Power plant superheater tubes.